(All Information reproduced from J W Young & Sons Ltd 1959 Catalogue) The AMBIDEX - MODELS 1 & 2 [1959 Retail Price (exclusive of Purchase Tax): £5]
The AMBIDEX - MODELS 1FP & 2FP [1959 Retail Price (exclusive of Purchase Tax): £7 10s.]
The AMBIDEX - NO. 3FP [1959 Retail Price (exclusive of Purchase
Dismantling for Oiling Do not dismantle unnecessarily Remove cover screws, retaining screw, and distance washer; lift cover off. Unwind tension unit until it will slide from the shaft; withdraw the line drum. Note: the No. 3FP line drum is withdrawn without disturbing the tension unit: simply revolve the serrated front face about one-sixth of a turn anti-clockwise, and lift. PICK-UP should be OPEN, and the REVERSE WIND STOP in the OFF position, for dismantling. The AMBIDEX NO.4 Ambidex No.4 1959 Retail Price (excl. Purchase Tax): £8 2s. 6d. (double drum), £7 10s. (single drum) All principal features which have made Ambidex models world famous are maintained in this New Streamlined Ambidex, plus the following improvements boldly outlined.
OILING INSTRUCTIONS Do not dismantle unnecessarily Place Anti-Reverse Ratchet Lever on 'OFF' position, remove cover screws, retaining screw and distance washer; lift off cover plate. Open Automatic Pick-up in casting position, unwind tension unit until it will slide from the shaft; withdraw the line drum. Oil frequently at points enumerated and re-assemble in the reverse order. Use only the finest quality thin Spindle Oil. DO NOT USE HEAVY GREASE ON ANY PART OF THE REEL as this will impair the smooth action and efficiency of the reel AMBIDEX No.4 - COMPLETE QUICK TAKE APART INSTRUCTIONS
Put Handle Crank in collapsed position, Anti-reverse Ratchet Lever in 'OFF' position and Automatic Pick-up 'OPEN' as ready for casting. Remove Shaft Retaining Screws, Distance Washer and Cover Plate Screws. Lift off Handle Crank and Cover Plate, withdraw Driving Shaft and components attached; withdraw Line Drum and Stationary Shaft intact. The reel is now sufficiently dissembled for thorough cleaning or replacement of spares. (Note:- The Revolving member carrying the Automatic Pick-up and the Pick-up itself should not be dismantled unnecessarily). To reassemble put back in the reverse order taking care to line up the hole in the stationary shaft with the guide pin engaged in the Reciprocal Arm.
0 Comments
Leave a Reply. |
Categories
All
|